=========kosong=

Canon PIXMA iP1500 Waste Ink Counter Reset.

this from http://dsacme.blogspot.com
about Canon PIXMA iP1500 Waste Ink Counter Reset.

Step1: Manual for Service mode

1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
Step 2 : Softwarefor Permanent
1. Reconnect the printer cable.
2. OpenGeneral Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.
Remark"After service mode Pls use software for permanent reset"

Canoni850, i950, S600
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute:
presses - light color - function
Number of presses - light color - function 0 presses - green- Test print (or exit service mode on i960)1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960) 2 presses - green - EEPROM initialize 3 presses - orange- Reset waste ink counter

Continue reading..

Download Epson Waste Reset Utility

You can download the SSc utility from here
http://inkjetprinterhelp.us/epsonSSC.html
Read the page and to should tell you which functions it supports for your printer.

more epson reset at
http://reset-epson-resetter.blogspot.com
Continue reading..

Resetter Printer Epson / SSCServe V 4.30

Resetter Printer Epson / SSCServe V 4.30

- support for R270
- support for R240
- support for R340
- support for CX2800
- support for CX3900
- support for CX4900
- support for CX5900
- support for C58/C59
- support for RX640
- improved support for C2100/2200
- improved support for RX700
- improved support for R2400
- improved support for 785EPX/825/895/915
- some other improvements and bug fixes

Resetter Printer Epson / SSCServe V 4.30 found at here
Continue reading..

Canon reseter i250 May You need to reset your Printer

Canon printer ink used to have a container that a time will surely full. and when expressed as full, the printer will ngeblink. for can not overcome, the printer must be reset. to reset it in the craftsman printer service charges will apply quite expensive, download where is clear, even make us irritated than dispose of waste of time, pay the cost of Microsoft, the results do not satisfy.

CANON RESETER MAY YOU DOWNLOAD HERE:
Canon reseter i250
Continue reading..

Resetting Ink Counter Level on Canon Pixma iP1600

the printer powered off but connected to a power source, press the Power button while pressing and holdingthe Stop/ Reset button.
When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into aservice mode. (Waiting for menu selection)
When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to thefunction listed in the table below.
(Each time the Stop/Reset button is pressed, the LED lights alternately inorange and green, starting with orange.)
note: press 4 times for waste ink counter reset.
The number of the Reset button pressingLED Function Remarks0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

regards,
Continue reading..