Canon Resetters Blogs

Home » canon » Canon mx300 reset the ink level

---

Canon mx300 reset the ink level

This is step for Canon mx300 reset the ink level make sure you follow very carefully 1. Disconnect the power cable
2. Connect it while holding down the power button
3. With the power button still down, press twice the "Cancel/Stop" red button
4. Release the power button
5. The printes turns into a kind of factory mode...(wait for about 10 seconds, utils it says "Idle")
6. Press the ">" (next to the "OK" button) once."Shipping Mode 3"
7. Press the "OK" button.
8. Press "OK" again for "Without cleaning"
9. A test page will print.
10. Open the cover, like you are about to change the cartridges.
11. Disconnect the power cable again.
12. Take out both cartridges.
13. Close the cover.
14. Connect the power cable once again.
15. Turn the printer on.
16. Now just put the cartridges back.

some simple step guide:
Turn off the printer
Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.
Hold the Power Button, release the Resume Button.
Not releasing the Power Button, double click “Resume” and release Both Buttons.
Click “Resume” for Four times
Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.

hope this will help you.