Home »
canon
»
Getting printhead stuck to the left on MX700 6A80 the got error
well this really anoying when busy with the job, in the same time the print won't print the reaason is stuck haha this is some Solution to fix yhe problem
(1) Turn the printer off.
(2) On the right at the end of the printer path is a white, square piece of plastic with 2 small pieces of colorless plastic sticking upright (on the back side you should see a spring attached to the plastic piece). Gently place your finger on that plastic plate and try to slide it to the front of the printer until it dissapears from your sight (you should hear a click).
(3) On the left side (where the printerhead is stuck), grab the printer head and slide it to the middle. Leave it there.
(4) Press the power button
Getting printhead stuck to the left on MX700 6A80 the got error
(1) Turn the printer off.
(2) On the right at the end of the printer path is a white, square piece of plastic with 2 small pieces of colorless plastic sticking upright (on the back side you should see a spring attached to the plastic piece). Gently place your finger on that plastic plate and try to slide it to the front of the printer until it dissapears from your sight (you should hear a click).
(3) On the left side (where the printerhead is stuck), grab the printer head and slide it to the middle. Leave it there.
(4) Press the power button