Home »
epson
»
Replace Color Cartridge on Epson 600Q Stylus
Touch pickup replacing is obligatory when the "sort ink" Replace Color Cartridge on Epson 600Q Stylus or experience lightsome is on and when the pickup is more than six months and the production of low caliber or washy prints.
Instructions
1 Turn on the Epson 600Q. Fold down the output tray and lift the printer cover.
2 Press the "cleansing" in the control panel for at least three seconds. Wait for the cartridge carrier to slide to the left of its rest position under the housing right side of the printer and the "Power" light will flash. If you want to remove a used cartridge, press the "Load / Eject" button instead.
3 Place your finger on the tab on the front of the cartridge slot and lift color ink cartridge cover.
4 Lift the cartridge slot, reserved for disposal.
5 Remove the color cartridge from its packaging. Hold the yellow tape at the top of the cartridge and gently pull it.
6 Place the new cartridge over the color cartridge slot with the arrow on the top label facing the printer. Insert the cartridge into the slot and then put on the lid and press firmly into place.
7 Press the "Clear" and lower the top of the printer in its original position to begin charging the ink. Wait about two minutes. When the "Power" light stops flashing and you can not hear the charging process will start printing again.
Replace Color Cartridge on Epson 600Q Stylus
Instructions
1 Turn on the Epson 600Q. Fold down the output tray and lift the printer cover.
2 Press the "cleansing" in the control panel for at least three seconds. Wait for the cartridge carrier to slide to the left of its rest position under the housing right side of the printer and the "Power" light will flash. If you want to remove a used cartridge, press the "Load / Eject" button instead.
3 Place your finger on the tab on the front of the cartridge slot and lift color ink cartridge cover.
4 Lift the cartridge slot, reserved for disposal.
5 Remove the color cartridge from its packaging. Hold the yellow tape at the top of the cartridge and gently pull it.
6 Place the new cartridge over the color cartridge slot with the arrow on the top label facing the printer. Insert the cartridge into the slot and then put on the lid and press firmly into place.
7 Press the "Clear" and lower the top of the printer in its original position to begin charging the ink. Wait about two minutes. When the "Power" light stops flashing and you can not hear the charging process will start printing again.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment