Canon mp258 driver download
Driver for Mac & Linux OS are not bundled with products; will be available via web download on Mac OS X & Linux OS Driver available only in Q3-2009. PIXMA MP145. PIXMA MP198. PIXMA MP228. PIXMA MP245. PIXMA MP258. PIXMA MP486
mp258 driver download for xp,pixma mp258,windows 7 download here
Reset printer canon mp198
1. Act with printer OFF
2. Bear set STOP/RESET and then regard set Knowledge
3. Transfer STOP/RESET (don't let go of the cognition meet yet)
4. machine STOP/RESET twice, then channelize Commonwealth
5. let vegetable illumine nictation until printhead has painted afoot.
6. Run Accommodation Mode Tools Version 1[1].050
7. Set emplacement Set: ASA (Continent Pacific) depends on your location
8. Put publisher in wadding feeder, Set Brighten Course Ink Choose: Important & Platen
9. Judge Photo Penetrate Cleaning1 Fix
10.Exculpated Drain ink Utter Primary Fasten
11.if theres no soul reflexion in the printer matter Stop/Reset Switch.
It testament indication expend ink status (D=000.0 Ps=000.0)
12.Depression Platen Fasten. It instrument make weaken ink state (D=000.1 Ps=000.0)
13. Rotation off and ON printer
Printer ravage ink absorber counter was succesfully reset.
Reset manual canon pixma ip4500
I work on Windows 7, and I got the message: no response from the printer or printer not recognized. So drivers and cables checked, used ink tank new, restart, but still error
After the printer nozzle tests successfully completed, the problem must lie elsewhere. After a little research on the internet I found the solution: An internal counter is responsible. Since I did not want to let me by Canon needed to purchase a new printer, I put back the printer via the service menu and thus raised him to new life.
here the methode how to reset for Error E16
1.Unplug power and USB cable.
2.Open door and hold power button.
3.Connect power.
4.Close door, then release power button and now your printer should be resetting.
Resetter Epson R240, R245, R250
Here how to Reset Epson R240, R245, R250 using adjustment program
1. Start with printer on.
2. Download and extract adjustment program for Epson R240, R245, R250.
3. run the adjustment program from extracted folder by clicking "adjprog.exe (or look for the application file or .exe file then run it).
4. click accept button
5. Set printer model and destination and then click ok
6. Select waste ink pad counter under maintenance option then click ok
7. Click read button to read the counter.
8. Click initialization to reset waste ink counter the Epson R240, R245, R250 and then finish
9. Restart your printer.
Reset Using SSCLG software (only for Epson R240)
* Download and install SSC serve software and then run it.
* Click configuration tab select epson stylus photo R240 in the printer model then close the configurations windows.
* Right click mouse on SSC icon in the systra then select "protection counter" and then select "reset protection counter"
Resetter Epson CX5500 and Epson CX5505
here how:
- Execute the adjustment program (printer must be ON)
- Choose maintenance ink pad menu
- Click read
- Click initialize
- Read(again) after "0" press finish
- Choose set shipping data (bottom menu)
- Choose set
- Wait for a while (about 1 minute)
- If there is a reaction from the printer (it will load some paper or you hear "glodak" sound), the reset process will be done. turn off the printer and then turn on again. repeat read the EEPROM
- If there is no reaction from the printer, repeat step 1
Resetter Epson T11 and Epson TX200
Below for the download link for resetter epson T10 and TX200
Epson Stylus TX300F Multi-function Printer
Epson Stylus TX300F is Multi-function Inkjet Printer, Scanner, Copier, Fax. Print speed of Epson Stylus TX300F is 31ppm with Black text and 15ppm in Color text in A4 paper. Maximum resolution Epson stylus TX300f is 5760 x 1440 dpi.
Interface connections is Epson Stylus TX300F using USB 2 to be connected to computer, as well as equiped with Transcend 2GB SD Card + Transcend 2GB Micro SD Card.
Reset Canon BJC-5000 and Canon BJC-5100
* Switch Printer off
* Hold Power for 1 beep.
The Reset Procedure foe Canon BJC-5000 and BJC-5100
1. Switch off the printers
2. Press and hold RESUME button then press POWER button, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME button four (4) times. The indicator should be GREEN.
5. Press Power to set data
Service Test Print
1. Turn off the printer Canon BJC-5000 and BJC-5100
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME button two (2) times. The indicator should be GREEN.
5. Press the Power button to Print
Nozzle Print
1. Power off printers Canon BJC-5000 and BJC-5100
2. Press and POWER, until heard beeps sound from the printer and release.
Demonstration Print
1. While the printer in ON , Press and hold RESUME button until the printer plays a melody of beeps.
Reset Waste Ink Tank Canon MP390 and Canon MP360
The Canon MP390 is a great multifunction printer for small homes. For most homes and small businesses, space is a consideration when buying office machines, which is exactly why multifunctions like the MultiPass MP390 from Canon are such a popular choice. By combining printing, copying, scanning, and fax functions into one convenient unit, you can save on valuable desktop space, while taking advantage of all the functionality normally provided by four separate peripherals. The MP390 can also print high-quality color photos directly from compatible cameras and memory cards.
Canon MultiPASS MP360
Canon MultiPASS MP360 is All-in-One (Printer - Copier - Scanner) multifunction Inkjet printer, designed for home and small office.
Manual Reset procedure Waste Ink Tank for Canon MP390 and Canon MP360 Just Follow this step to reset waste ink tank full:
1. Start with printer on, press aadditional functions, Scan, Copy, Scan. Now you should be in service mode.
2. Select Test mode which is like the last available selection
3. Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button
* The menu will now say EEPROM Clear
* Select Ink count which is option (0) and press set
* Then press Stop/Reset Followed by the power button and then wait for it to restart.
Reset the Ink Level for Canon MX300
- Disconnect the power cable
- Connect it while holding down the power button
- With the power button still down, press twice the "Cancel/Stop" red button
- Release the power button
- The printes turns into a kind of factory mode...(wait for about 10 seconds, utils it says "Idle")
- Press the ">" (next to the "OK" button) once."Shipping Mode 3"
- Press the "OK" button.
- Press "OK" again for "Without cleaning"
- A test page will print..
- Open the cover, like you are about to change the cartridges.
- Disconnect the power cable again.
- Take out both cartridges.
- Close the cover.
- Connect the power cable once again.
- Turn the printer on.
- Now just put the cartridges back...
Waste Ink Tank Reset Canon SmartBase MP730c
Canon SmartBase MP730 Photo offers you the best available quality in an easy-to-use All-in-One machine guaranteeing high speed and high productivity. The SmartBase MP730 Photo delivers top Canon photo print quality with 4800 x 1200 dpi and 2 picoliter consistent droplet size. The newly developed 'Micro-Nozzles' coupled with Advanced MicroFine Droplet Technology reduce graininess to ensure you of the clearest, crispest photo and text prints available. And, it prints and copies a phenomenal 22 pages per minute in monochrome and 14 pages per minute in color.
Manual Reset procedure for waste ink tank full error in Canon Smartbase MP730 printers:
- Hit the “menu”: Key
- Hit “Copy” Key
- Hit “#” Key
- Scroll thru the menu headings until you come to “Test Mode” - 12th heading
- Hit the “3″ button- this will bring up Eeprom Clear
- Hit “0″ button
- Hit the “Stop” button
Reset Ink Tank Full Error Canon
Stage One (Hardware Reset)
1. Turn off the printer, and then unplug the power cord
2. Press and hold the POWER button printer using the index finger
3. Replace the power cord
4. Use your middle finger to press the Resume button 2 times
5. Remove your index finger from the POWER button
6. You have completed the first phase to reset Ink Tank Full Error
(blinking power light)
Second Phase (Software Reset) to Permanent
1. Download the application resetter (large file 9.7 MB)
2. Extract / Unrar in C: \ iP1200
3. Ensure that all file attributes from Read Only
4. Run GeneralTool.exe
5. In USB Port select your printer port
6. Select (check) EEPROM CLEAR
7. Provide blank paper to print, then click the Test Pattern 1
8. Finish, iP1200 and iP1600 printers you back to normal
Resetting Canon Pixma MP450
- You must start with printer off and power cable connected to eectric source.
- While press and hold Resume/Cancel button press POWER button- led indicator light in green color.
- While hold Power button, release Resume/Cancel button.
- press Resume/Cancel button for 2 times, while hold POWER button, after that, release all button.
- When led indicator will be lit in GREEN - press Resume/Cancel for 4 times!
- Turn off the canon pixma mp450 using POWER button.
Canon S Series Reset Procedures
1.Turn off the printer.
2.Press and hold the RESUME button, then press and hold the POWER button.
3.Release the RESUME button, Next press and release the RESUME button two(2) more times in succession.
-Service/Factory test printout, including ink sensor check.
-EEPROM - Info printout.
-EEPROM - Initialization.
-Reset the Waste ink counter.
-Printer model setting. (More selections beyond this point "However it is best leave them unaltered" You have been warned!)
After selecting the desired mode (eg 4), press the POWER button to “set” the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.
Canon i320 i255 Waste Ink Counter Reset
Manual for Service Mode Canon i320 i255 Waste Ink Counter Reset
METODE 1 :
- Unplug power and USB.
- Open door and hold power button.
- Connect power.
- Close door, then release power button.
- Turn off the printer. And disconnect the printer cable.
- Press and hold the POWER button, turn on the printer.
- The indicator (L.E.D.) should be green.
- Press and release the RESUME button , the indicator (L.E.D.) should be orange.
- Press and release the RESUME button again, the indicator (L.E.D.) should be green.
- Release both buttons.
Canon BJC-2100SP Waste Error Reset
2: Unplug the AC Power Cord
3: Open Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data.
Canon BJC-5000 Waste Ink Counter Reset
- Power off printer
- Press and hold RESUME then press POWER, The indicator will start blinking.
- While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
- When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
- Press Power to set data
- FINISH
Refill Ink Instructions
1. The filling holes are located under the label as shown. Just peel back the label leaving it still connected to the cartridge, do not remove completely.
2. Use the provided eyelet screw to widen the filling hole(s) in the top of the cartridge(s).
3. Connect the needle to the syringe and fill with ink.
4. Insert the needle into the widen filling hole. Note: This cartridge has a sponge so you may feel a slight pressure. Inject about 10 ml. of ink, per color until the ink bubbles up.
5. Pull the label back into place and use a piece of tape to hold it in place.
6. Rinse the syringe with water and dry between each color refill or store for future use.
7. Reinsert cartridge back into the printer and run 1 - 3 cleaning cycles as per printer instructions
Canon S900 printer, Canon S820 printer, Canon S750 printer, Canon S520 printer reset
* Press and hold the RESUME button, then press and hold the POWER button.
* While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
* The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.
* Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
1. Service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
6. After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.
Cartridge Canon BCI-60, Canon BCI-61, Canon BCI-62 Refill Ink
1. The filling holes are located under the label as shown. Just peel back the label leaving it still connected to the cartridge, do not remove completely.
2. Use the provided eyelet screw to widen the filling hole(s) in the top of the cartridge(s).
3. Connect the needle to the syringe and fill with ink.
4. Insert the needle into the widen filling hole. Note: This cartridge has a sponge so you may feel a slight pressure. Inject about 10 ml. of ink, per color until the ink bubbles up.
5. Pull the label back into place and use a piece of tape to hold it in place.
6. Rinse the syringe with water and dry between each color refill or store for future use.
7. Reinsert cartridge back into the printer and run 1 - 3 cleaning cycles as per printer instructions
Canon Printer i850, i950, S600 Resetter
1. Hold down RESUME and then hold down POWER
2. Release RESUME
3. Press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute: presses - light color - function
Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter
ADDENDUM TO CANON RESETTER INSRUCTIONS
In turn, this has also added a random element to the reset operation. The reset is, however, just as effective and provided you follow these simple instructions, you can still effectively reset all CLI8 and PGI5 cartridges.
1. Printers affected by the change.
The firmware revision took place around April 2007, so all printers manufactured after this date are affected. This includes iP4300, iP5300, iP6700, MP510 and MP560 although pre April 2007 models of these printers are not affected.
Printers from the previous range such as iP4200, iP5200, iP6600 and MP500 are not affected by this change and if you have one of these printers, simply follow the main instructions.
Our advice would be to use one of the previous range of printers if possible. Although they are no longer widely available, if you visit smaller IT stores or try to buy second hand you should not have too much difficulty getting one.
Alternatively, consider offering a customer a swap-out to a new machine in return for his/her old one. They get a brand new machine with a full set of OEM cartridges and you get the best printer for resetting.
2. Resetting with the new revision printers
Connect the Resetter to the printer as described in the main instructions.
It is essential that both cartridge bays have a cartridge fitted before carrying out the reset. You may wish to keep some spare cartridges for this purpose.
To begin the reset, press and release the printer’s lid switch as described in the main instructions.
As the carriage moves to the middle of the printer, the integral LED on one cartridge will light briefly before the Resetter’s Busy LED lights. Ignore this light.
Once the Busy light is extinguished, only one of the cartridges will have been reset and its integral LED will light. The LED in the other cartridge will stay out to indicate that it has not been reset this time. Exactly which of the two cartridges is reset each time is random.
Leave the cartridges in situ and repeat the reset operation. Either the same cartridge will reset again or the other one will reset. If necessary, repeat until both cartridges have been individually reset. You may then remove both cartridges. Note that once a cartridge has been reset it will stay reset, even if its integral LED does not light on subsequent cycles.
In summary, the Resetter will reset only one cartridge per cycle, and exactly which one is random. If the integral LED in any cartridge is lit after the Busy LED has been extinguished, then that cartridge has been reset during this cycle.
Our advice is to practice this a couple of times and then try the cartridges in a printer to satisfy yourself that you understand how the resetter functions in these printers.
Canon Printer BJ F900, F890, F700, F500, S900, S820, S750 and S520
- Turn off the printer.
- Press and hold the RESUME button, then press and hold the POWER button.
- Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily.
- Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
- Service/factory test printout, including ink sensor check
- EEPROM info printout
- EEPROM initialization
- Clear the waste-ink counter
- Printer model setting. (more selections beyond this- leave this alone)
Cartridge Canon BCI-60, BCI-61, BCI-62 Refill Ink Instructions
- The filling holes are located under the label as shown. Just peel back the label leaving it still connected to the cartridge, do not remove completely.
- Use the provided eyelet screw to widen the filling hole(s) in the top of the cartridge(s).
- Connect the needle to the syringe and fill with ink.
- Insert the needle into the widen filling hole. Note: This cartridge has a sponge so you may feel a slight pressure. Inject about 10 ml. of ink, per color until the ink bubbles up.
- Pull the label back into place and use a piece of tape to hold it in place.
- Rinse the syringe with water and dry between each color refill or store for future use.
- Reinsert cartridge back into the printer and run 1 - 3 cleaning cycles as per printer instructions
Canon PIXMA iP1500 Waste Ink Counter Reset.
about Canon PIXMA iP1500 Waste Ink Counter Reset.
Step1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
Step 2 : Softwarefor Permanent
1. Reconnect the printer cable.
2. OpenGeneral Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.
Remark"After service mode Pls use software for permanent reset"
Canoni850, i950, S600
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute:
presses - light color - function
Number of presses - light color - function 0 presses - green- Test print (or exit service mode on i960)1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960) 2 presses - green - EEPROM initialize 3 presses - orange- Reset waste ink counter
Download Epson Waste Reset Utility
http://inkjetprinterhelp.us/epsonSSC.html
Read the page and to should tell you which functions it supports for your printer.
more epson reset at
http://reset-epson-resetter.blogspot.com
Resetter Printer Epson / SSCServe V 4.30
- support for R270
- support for R240
- support for R340
- support for CX2800
- support for CX3900
- support for CX4900
- support for CX5900
- support for C58/C59
- support for RX640
- improved support for C2100/2200
- improved support for RX700
- improved support for R2400
- improved support for 785EPX/825/895/915
- some other improvements and bug fixes
Resetter Printer Epson / SSCServe V 4.30 found at here
Canon reseter i250 May You need to reset your Printer
CANON RESETER MAY YOU DOWNLOAD HERE:
Canon reseter i250