Showing posts with label samsung. Show all posts
Showing posts with label samsung. Show all posts
Printer Reset Program For Samsung Laserjets
Printer Reset Fix Program For-
List support model Samsung ML-1910, V1.01.00.83 Samsung ML-2520, V1.01.00.84 Samsung ML-2580N, V1.01.00.84 Samsung SCX-3200, V3.00.01.08 Samsung SCX-3200, V3.00.01.08 NU
Samsung SCX-3200, V3.00.01.07 Samsung SCX-3200, V3.00.01.07 NU Samsung SCX3200, V3.00.01.09 NU Samsung ML-1860, V1.01.00.18 Samsung ML-1860, V1.01.00.18 NU Samsung ML-1860, V1.01.00.19 NU Samsung ML-1865w, V3.00.01.05 Samsung ML-1865w, V3.00.01.05 NU Samsung ML-1660, V1.01.00.34 Samsung ML-1660, V1.01.00.34 NU
Know How to Reset Samsung ML 2240 laserjet printer
"How to reset samsung ml-2240 toner chip, samsung ml-2240 error light, samsung ml-2240 red light,error samsung ml-2240"
Printer Samsung ML-2240 is an very good laser printer in very less cost. But the problem is that, when we refill the cartridge with toner it doesnt print
giving red flashing led and will ask for changing the toner cartridge(New Toner Cartridge Is Costlier So, you can save money by simple resetting your
printer)
How to Reset Samsung ML-2240 laserjet printer? Do the steps below..
1. Open the back cover of the printer by unscrew 2 nuts.
2. There are 2 PCBs inside, which one is the Power supply circuit board and other is main printer board i.e., green color.
3. Find a small eprom 93C66 IC (8 pin) in Green Printer Board.
4. Connect PIN 1 and 4 of the IC 93C66 with a small cable and solder it.
5. Then make sure all the cables are plugged back, and turn on the printer Samsung ML-2240.
6. Wait a few moments until the Samsung ML-2240 Printer calibration is complete and the lights flash green.
7. After a light green flame, turn off the printer.
8. Disconnect the small cable that connects pin 1 and 4 IC 93C66.
9. Close the printer Samsung ML-2240, do not forget to attach the screw.
10. Samsung ML-2240 printer is ready for use again.
Samsung CLX 3185FW Laser Multifunction Printer – What You Need To Know Before Buying It
Overview
If you need a multifunctional printer which is rendering the highest quality full color photos, you need to know that Samsung CLX-3185FW printer leads the market in this department. It offers impressive color laser prints and copies, which is great for home use. The simple wireless setup and the eco copying feature makes this printer a very easy to use device.
Pros
You can connect an entire office to the Wi Fi network with just a press of a button. Samsung tried to create a very easy to set multifunctional printer, and because of this fact they put emphasis on creating features for non-technical users. Something unusual for these kinds of printers, Samsung Company also invested in eco saving features. They created an eco-copying function that allows anyone to print 4 in one pages.
This thing did not satisfy some customers because once you will choose this feature you will have to change it over and over again, every time you are printing something. However, if you do not want to use this feature anymore, you can simply set another default option. Even though this kind of feature exists for a while, they gave it a cool name creating a special button for this option. So, now they say this is an innovative element. Loading 4 papers in the same time seems to be a slow and tricky job, because of the lack of an automatic document feeder. For a printer that is considered an all-in-one device, it is too slow.
Appearance was another aspect on which Samsung placed emphasis. Because this is a home use multifunctional device it needs to look very well. They added LED lighting and many other things like this in order to give the printer some style. They created a compact printer with the 16 x 14 x 13 inches dimensions, which can be put anywhere in the house because it is small and not very heavy.
Cons
The Samsung CLX-3185FW printer definitely costs too much for regular users. Its printing speed is very low, 16 pages per minute in white and black, while the printing speed in full color is 4 times lower, 4 pages per minute. However, you need to know that the printing quality is definitely higher than any other brand’s product. It prints at a resolution of 2400 x 600 dots per inch, but even though the printing quality is very high and the resolution is good, it cannot cover the disadvantages of a low printing speed.
The operating costs could prove to be higher than the ones of an old ink jet printer, which is a major disadvantages for small businesses with a low budget.
Samsung ML-1660 Resetter Guide another method
1. Remove Other All USB Device Except Mouse.
2.TurnOff Computer.Join The Printer While Computer Is Still Close.
3.Open The Computer.
4.At Printer,I Press One Click Print Buttom.At Print Paper I Also Saw Printer Condition Page.
5.Run The f1660.exe.While Running I don't know this language,I see all word is ???????I can read only V30 Original Firmware Version & V30 Patch Firmware Version.Appear dos window and See Press Any Key To Continue."Need To Press Any Key"
6.I click V30 Patch Fireware Version.And Watch At Printer,After a few seconds, the LED glows orange on the printer,Then Green light blinks 3...4 Time,& Then Still Green.
7. Remove the print cartridge. Refill Toner ,Seal with tape the chip. Insert the cartridge into place.
At Samsung Printer Seeting My cartridge With Full With Black Toner
Download f1660.exe From http://up4vn.com/?d=0CXOZVXM
Continue reading..
2.TurnOff Computer.Join The Printer While Computer Is Still Close.
3.Open The Computer.
4.At Printer,I Press One Click Print Buttom.At Print Paper I Also Saw Printer Condition Page.
5.Run The f1660.exe.While Running I don't know this language,I see all word is ???????I can read only V30 Original Firmware Version & V30 Patch Firmware Version.Appear dos window and See Press Any Key To Continue."Need To Press Any Key"
6.I click V30 Patch Fireware Version.And Watch At Printer,After a few seconds, the LED glows orange on the printer,Then Green light blinks 3...4 Time,& Then Still Green.
7. Remove the print cartridge. Refill Toner ,Seal with tape the chip. Insert the cartridge into place.
At Samsung Printer Seeting My cartridge With Full With Black Toner
Download f1660.exe From http://up4vn.com/?d=0CXOZVXM
Reset for Samsung ML-1660
1. Connect the printer to the computer and turn it on.
2. Print report printer. In 164H, press and hold three to five seconds, press the cancel button. Until the printer are flashing lights.
3. Consider the printout. We are interested in line OS Version. It spelled out the printer firmware version. Looks like this (OS Version 1.01.00.HH)
9. Turning off the computer all USB devices except mouse and treated printer.
10. Run the program firmware f16xx.exe
11. Select the device and firmware version and click the appropriate button. (Say V.30 path firmware)
12. Appear dos window and it will run the point.
Attention. If the points do not run, it means that something went wrong. check the connection and try again.
14. After a few seconds, the LED glows orange on the printer. This is normal. After completing the firmware in 2-3 minutes will restart the printer. He has to rustle engines and calm down.
13. Remove the print cartridge. Seal with tape or remove the chip. Insert the cartridge into place.
Revised unit behaves as follows:
Cartridge with the chip is handled appropriately. Prints until the counter is not empty.
Over the counter - the device is locked.
Cartridge without chip or a sealed chip is treated as a full cartridge. Counter clicks, percent decrease, while the unit does not switch off. If the machine off and on again it starts all over again. Again a full report on the cartridge and counter work.
In the last (Laid here) version fixing boot made in normal mode. Enabled device, pootmenyali installation of new devices and loaded the firmware. Nevertheless, the instruction to stop jammed not hurt. For emergency lifting apparatus. If something went wrong. (The light blinks)
Instructions to stop jammed! (Boot)
1. Disable unnecessary USB devices, leave only the mouse.
2. Connect the unit is turned off the computer.
3. Run the BIOS file f16xx.exe
4. The unit click Stop. And do not go to step 7.!
5. Turn the unit on. In 1660/1665 Start button next to the Stop, at 164h - switch.
6. After two - three seconds the LED on the printer blinks rapidly.
7. Release the button Stop.
8. Select the device and firmware version and click the appropriate button. (Say V.30 path firmware)
9. Appear dos window and it will run the point.
10. After a few seconds, the LED glows orange on the printer. This is normal. After completing the firmware in 2-3 minutes will restart the printer. He has to rustle engines and calm down.
11. Remove the print cartridge. Seal or remove the chip. Insert the cartridge into place.
download firmware here
Continue reading..
2. Print report printer. In 164H, press and hold three to five seconds, press the cancel button. Until the printer are flashing lights.
3. Consider the printout. We are interested in line OS Version. It spelled out the printer firmware version. Looks like this (OS Version 1.01.00.HH)
9. Turning off the computer all USB devices except mouse and treated printer.
10. Run the program firmware f16xx.exe
11. Select the device and firmware version and click the appropriate button. (Say V.30 path firmware)
12. Appear dos window and it will run the point.
Attention. If the points do not run, it means that something went wrong. check the connection and try again.
14. After a few seconds, the LED glows orange on the printer. This is normal. After completing the firmware in 2-3 minutes will restart the printer. He has to rustle engines and calm down.
13. Remove the print cartridge. Seal with tape or remove the chip. Insert the cartridge into place.
Revised unit behaves as follows:
Cartridge with the chip is handled appropriately. Prints until the counter is not empty.
Over the counter - the device is locked.
Cartridge without chip or a sealed chip is treated as a full cartridge. Counter clicks, percent decrease, while the unit does not switch off. If the machine off and on again it starts all over again. Again a full report on the cartridge and counter work.
In the last (Laid here) version fixing boot made in normal mode. Enabled device, pootmenyali installation of new devices and loaded the firmware. Nevertheless, the instruction to stop jammed not hurt. For emergency lifting apparatus. If something went wrong. (The light blinks)
Instructions to stop jammed! (Boot)
1. Disable unnecessary USB devices, leave only the mouse.
2. Connect the unit is turned off the computer.
3. Run the BIOS file f16xx.exe
4. The unit click Stop. And do not go to step 7.!
5. Turn the unit on. In 1660/1665 Start button next to the Stop, at 164h - switch.
6. After two - three seconds the LED on the printer blinks rapidly.
7. Release the button Stop.
8. Select the device and firmware version and click the appropriate button. (Say V.30 path firmware)
9. Appear dos window and it will run the point.
10. After a few seconds, the LED glows orange on the printer. This is normal. After completing the firmware in 2-3 minutes will restart the printer. He has to rustle engines and calm down.
11. Remove the print cartridge. Seal or remove the chip. Insert the cartridge into place.
download firmware here
Subscribe to:
Posts (Atom)